Metallmaterjalina on lineaarsed juhikud kergesti roostetavad ja pärast roostetamist on neid raske hooldada. Mida me siis tegema peaksime? Järgnevalt on toodud mõned näpunäited lineaarsete juhikute roostehoolduse kohta. Loodan teile anda viite.
1. The stop time is greatly shortened, so that the linear rail is in a state of moving and working at all times, and rust is prevented by increasing the frequency and efficiency of use.
2. It would be great if the scalar of the linear guide can be strictly controlled. As long as the scalar is within the specified range, the service life is generally relatively long. At the same time, it would be perfect if the noise interference on the linear guide can be reduced.
3. When working in a high-speed environment, try to reduce the temperature rise of the motor as much as possible, and do not let the motor sling oil. If the power consumption can be reduced, it would be better to protect the motor.
4. Kui soovite seda puhastada, siis tuleks demonteeritud komponendid võimalikult palju klassifitseerida, kuna erinevate komponentide puhastamiseks on erinevaid viise, peenpuhastust ja karepuhastust. Samal ajal pöörake tähelepanu sellele, et lineaarset juhikut ei asetataks diskreetselt. Konteineris tuleks esmalt puhvrina kasutada metallvõrku, et komponendid ei puutuks kokku anumas olevate määrdunud ainetega.
5. If you are working at low temperature, it would be great if you can ensure the spirituality of linear guide start and the spirituality of work in advance, and at the same time, try to keep the output power as small as possible in a low temperature environment.
6. Keep the environment as clean as possible when using it. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide, then the probability of wear can be greatly reduced, and vibration and noise can also be reduced.
In short, the maintenance of linear guides requires patience and persistence. Doing the above points can prevent rust and improve the maintenance effect.
